The reason why people prefer for Setek extender is so that they can say goodbye to dead zones in their home. But, after performing the Setek setup process, 4 out of 5 users are complaining that their WiFi range extender is not performing well. Instead the extender itself stops working. If you are also experiencing the same issue, then the tips provided here will help you.
Over here, you will find some of the best tips and tricks following which your extender will start working for you again in minutes. Let’s get the ball rolling!
Why Setek Extender is Not Working?
Some topmost reasons may not let your range extender to work properly. Have a quick nudge below to get familiar with them.
Reason 1: Your Setek WiFi extender needs a continuous power supply in order to work. However, it looks like your Setek device is not receiving the same. Yes, that’s absolutely right! If your Setek WiFi extender is receiving a steady power supply from its wall outlet, you would not be experiencing the issue in discussion.
Reason 2: Another reason why you are experiencing Setek WiFi extender not working issue is that its signals are getting interrupted by interference-creating objects like Bluetooth speakers, cordless phones, and microwave ovens are kept near to it.
Reason 3: Last, but not least, your Setek extender has not been set up by you in a proper manner. Either you have followed incorrect instructions to execute the setup process or missed a step or two while executing it.
No matter whatever reason causing the issue, know that we have got you covered. In the upcoming section, you will learn how to fix the issue and make the most out of your Setek extender.
Setek WiFi Extender Not Working Issue [Fixed]
The fixes that will help you make your Setek WiFi extender working are right here. Scroll down a little, grab them, and apply them for well-working and smooth performance of your Setek extender.
Check the Setek WiFi Extender’s Wall Socket
First things first, you are supposed to check the wall socket to which you have plugged in your Setek extender. In case you find the socket damaged from any point, we suggest you call your electrician right away. Although this will help you to fix the issue in discussion at hand, still it does not; we suggest you plug your WiFi extender into another working wall socket.
Now, check if a steady power supply is enough for you to get rid of the Setek WiFi extender not working issue. On the off chance, your extender is still not working, then without delay, you may try the next troubleshooting hack in line. The troubleshooting highlighted below will surely help you.
Keep Your WiFi Extender and Interference-Creating Obstructions at Distance
Bluetooth speakers, baby monitors, cordless phones, microwave ovens, washing machines, refrigerators, treadmills, televisions, and other similar obstructions emit electromagnetic waves that may clash with your extender’s WiFi signals.
Wipe out that sweat from your forehead! We are just beside you! We suggest you keep interference-creating WiFi obstructions at bay by moving your Setek extender from its present location to one that is not surrounded by the obstructions outlined above. Also, we suggest that you avoid keeping your extender closer to thick walls, corners, and windows.
Reset Setek Extender
In view of you reading this troubleshooting hack, we are assuming that you are still struggling with Setek WiFi extender not working issue, is that correct? If yes, need not to worry. To get rid of the reason, we suggest you reset your Setek extender back to factory default values.
To reset your Setek WiFi extender, here are the instructions that you need to follow:
Step 1: First things first, disconnect your Setek extender from your host router (if connected).
Step 2: Then, locate the reset button on your WiFi extender and press it using a paper clip.
We do not suggest you turn off your Setek extender. Keep it plugged in during the reset process.
Step 3: Hold up the extender’s reset button for 10 seconds.
Step 4: Release it.
Done resetting your Setk WiFi extender? Yes? Good. Now, you may perform Setek setup process using 192.168 10.1 IP (manual method). Not sure about executing Setek extender setup process? Yes? Click on the highlighted term for complete Setek extender setup instructions.
Now, we are about to conclude this piece of writing. Anticipating that, you have get rid of Setek WiFi extender not working issue and enjoy seamless internet on your client devices all over your home.