I have installed a wireless range extender in my home and it is working absolutely fine. The extender can extend the Netgear Nighthawk router’s range and gives stable internet signals. But the problem is that after the extender is installed, the router is not giving internet to the devices. What could have happened to the router that we can’t connect to its internet? This is a concerned raised by a Netgear router user.
Is your Nighthawk router not working too after it is connected to the wireless extender? Reading this post will be beneficial for you. In this post, you will get the best possible solutions to fix similar issues. Let’s begin.
Nighthawk Router Not Working: Try This
1.Restart the Netgear Router
This is the versatile fix that you must give a shot at before trying anything else. Restarting gives the network connection a new push. So, power off the Netgear router by unplugging it. Let it stay unplugged for some time. Plug it back and then try connecting to its network.
2.Try Making LAN Connection
If you are having issue while joining the Netgear router’s network using its WiFi, then you should try making a LAN connection. Get hold of a LAN cable and join the router’s network using it. Is the LAN connection also not working? Make sure that the LAN cable is in good condition and the connection is well intact. Try the next hack in line if you can’t get internet.
3.Check the Power Connection
If the Netgear router is not powered on completely then also you’ll not be able to connect to its network. You should thus check the power supply to the router now. Examining the power cable and the power socket is recommended to verify the power supply to the router. Use a UPS if there are fluctuations in the power. Mend anything that’s damaged or faulty and make certain that your router is receiving consistent electricity.
4.Use Another Device
Try connecting an alternative device to access the Netgear router’s internet. There are chances that only one device has trouble connecting to the router’s internet. If other devices can also not connect, then proceed to the next hack.
5.Reset the Router
Resetting the Netgear router is recommended when it’s not getting fixed even after using all the fixes listed above. Press and hold the Reset button located on the back of the router to have the factory settings running on it. The current settings will be erased from the router once it is factory reset.
Set Up the Netgear Router from Scratch
Use the Netgear Nighthawk app or the web interface to set up your router once again from the very beginning. Here are the steps that you need to follow:
- Connect the router to the modem with the help of a LAN cable.
- Plug in the modem and router to supply power to them.
- Join the router’s network on the PC or the phone on which you’ve downloaded the Nighthawk app.
- Run the browser on your PC or launch the Netgear router app on your phone now.
- The further process is to simply follow the prompts appearing on the screen.
- Do what exactly the instructions ask you to do and complete the router setup.
Update the Netgear Firmware
After the setup is completed, we suggest you to update its firmware to the most recent version. Although you can update the firmware during the setup process, if you haven’t done, then do it now. Use the Netgear Nighthawk login admin details and log in to the router. Check for firmware updates and install the latest firmware on the router.
Let’s Wrap it Up
The moment you are done setting up the router and updating the Netgear router, reconfigure your WiFi extender to it. Make certain that you’re following the correct steps this time so that you are not falling in the same pit of issues once again. We are sure after the WiFi extender is set up, you will have no issue connecting to your router’s network.